Heavy Duty Wide Web Spray Adhesive
This wide web spray adhesive is one of the highest performance aerosol adhesives available. For both temporary or permanent bonding, this high solids product is ideal for uneven or porous surfaces.
Waterproof, flexible, transparent and non staining, use this product for your toughest adhesive applications, including noise control and pro audio applications made of foam, fabric, cotton, fiberglass, polypropylene, leather, cardboard, most plastics and many other materials. Not intended for use on vinyl.
Formulated with the environment in mind, this product contains NO CHLORINATED SOLVENTS OR OZONE DEPLETERS. Cleans easily with Mineral Spirits.
Wide Web Spray
Temporary or Permanent Bond to Most Surfaces
No Chlorinated Solvents
No Ozone Depleters
Waterproof, Flexible, Transparent and Non-staining
Ideal for Uneven or Porous Surfaces or Weight Materials
Use this product for your toughest adhesive applications
SIZE: 12 oz.
HMIS RATING: Health = 2, Flammability = 3, Reactivity = 0, Personal Protection = B
Always shake well before using. Never aim valve at face. Hold can upright and apply adhesive in a side-to-side motion 10 to 14 inches from surface. TEMPORARY BONDS: Spray one surface, allow to tack and apply material to be bonded.
Liberally spray both surface and material, allow to tack, then apply.
CLEANING SPRAY TIP: When finished with a particular spray application, always turn can upside down and spray for two seconds to clear valve and prevent clogging. If adhesive accumulates around nozzle, wipe clear while wet. If dried in valve opening, remove with degreasing solvent.
Contains Acetone and Hexane. Extremely Flammable. Use with adequate ventilation. Keep away from heat, sparks, open flame or other ignition sources. Harmful or fatal if swallowed. Do not take internally. If swallowed, do not induce vomiting. Contact a physician immediately. Vapor harmful. Avoid inhalation of spray mist or vapors. If overcome, move patient to fresh air.